Note: the product must be in new condition, in the original packaging.
To request a refund or exchange, please email support@deltapro.com.au within 30 days of placing your order. Click here for further information on Exchanges and Returns.
Reduce downtime – Find leakage currents without taking equipment offline.
The Fluke 368 FC true-rms leakage current clamp meter helps users detect, document, record and compare leakage current readings over time as a means of preventing unplanned downtime, and identifying intermittent GFCI and RCD trips, all without taking equipment off line.
The Fluke 368 FC has a large 40 mm diameter jaw for work with large conductors. The clamp’s jaw is fully shielded to accurately capture very small leakage signals, and to minimize external electromagnetic interference.
The 368 FC also offers wireless data connectivity via Fluke Connect. As part of Fluke Connect — the industry’s largest system of software and more than 40 wireless test tools — the 368 FC allows you to track changes in leakage current over time, helping to identify potential problems before they turn into major failures.
** THIS PRODUCT COMES WITH A FREE GIFT - an Extech DV23 voltage detector pen, valued at $29 **
QUICK STATS
FEATURES
* True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
* 40 mm jaw opening
* Highest resolution of 1 μA, measure up to 60 A
* Selectable filter function removes unwanted noise
* Max/Min/Average readings and hold function
* Forward-facing LED worklight for use in dark wiring cabinets
* Backlit display; auto backlight off and auto power off for extended battery life
* CAT III 600V safety rating
* Internal Memory Logging: up to 65,000 measurement points
ACCESSORIES INCLUDED
* Soft case
* Batteries: 2 AA
* Safety manual
SPECIFICATIONS
Electrical Specifications | ||
Measurement function | Alternating current | |
AC ampere range | 3 mA, 30 mA, 300 mA, 3 A, 30 A, 60 A | |
mA / A: manual selection 3 mA / 30 mA / 300 mA: automatic selection 3 A / 30 A / 60 A: automatic selection |
||
Range / Resolution | 3 mA¹ / 0.001 mA | |
30 mA / 0.01 mA | ||
300 mA / 0.1 mA | ||
3 A / 0.001 A | ||
30 A / 0.01 A | ||
60 A / 0.1 A | ||
Accuracy – filter activated (40 to 70 Hz), filter off (40 to 1 kHz)² | 3 mA – 30 A 60 A |
1% + 5 digits 2% + 5 digits |
Frequency | 40 Hz to 1 kHz | |
Crest Factor | 3 | |
After calibration accuracy is valid for one year. Accuracy is expressed as ± (% of reading + digits). Reference conditions 23 ±5 °C and a maximum relative humidity of 80%. ¹The minimum value is 10 μA rms. ²Outside of the TC / °C 18 °C to 28 °C, 0.02 + 1 |
||
Physical | ||
Display (LCD) | Digital readout: 3300 count | |
Display refresh rate | 4 times / sec | |
Maximum conductor diameter | 40 mm | |
Dimensions | 234 x 101 x 46 mm | |
Weight | 500 g | |
Battery | 2 AA, IEC LR6, NEDA 15A, alkaline | |
Battery life | Expected battery life, without using backlight and spotlight, is more than 150 hours | |
Automatic shut-down | Meter automatically shuts down after 15 minutes of inactivity | |
Safety and Environmental Specifications | ||
General safety | IEC 61010-1: Pollution Degree 2 | |
Measurement safety | IEC 61010-2-032: CAT III 600 V / CAT IV 300 V | |
Operating temperature | -10 °C to +50 °C | |
Storage temperature | -40 °C to +60 °C | |
Operating humidity | Non-condensing (<10 °C) | |
90% relative humidity (10 °C to 30 °C) | ||
75% relative humidity (30 °C to 40 °C) | ||
45% relative humidity (40 °C to 50 °C) | ||
Protection class | IEC 60529: IP30 (jaw closed) | |
Operating altitude | 2000 m | |
Storage altitude | 12000 m | |
Current sensor action category | IEC 61557-13: Class 2, ≤30 A / m | |
Electromagnetic compatibility (EMC) | ||
International | ||
IEC 61326-1 | Industrial Electromagnetic Environment | |
CISPR 11 | Group 1 Class B | |
Group 1 | Generated inside the equipment and / or use radio frequency energy associated with conducting the energy for the device's own internal functions is essential. | |
Class B | Equipment for home appliances and residential buildings directly connected to a low voltage power supply network equipment. When this device is connected to a test object, it may exceed the emission levels produced by CISPR 11 requirements. Korea (KCC): A type of equipment (radio and communication equipment industry) |
|
Class A | This product meets the requirements of industrial electromagnetic equipment, vendors or users should be aware of this. This device is intended for use in a commercial environment, instead of the home environment. USA (FCC): 47 CFR 15 B Subpart. In accordance with section 15.103 provides that the products are considered tax-free device. |
DATA SHEET Click here to view in pdf format
We know you want your order FAST, and so we make sure you receive it as quickly as possible.
If your order is in stock, it will ship by the following business day. Shipping is generally 2 - 5 business days (allow 1 or 2 extra days if you're in NT, WA, or a remote location).
And of course we want the ordering process to be as simple as possible for you, so rather than offering tiered shipping rates, we offer FREE SHIPPING AUSTRALIA WIDE on all orders.
If you have any questions about the shipment of your order, feel free to contact us at support@deltapro.com.au
******
Order Confirmation:
As soon as you place your order, you will receive an order confirmation email. This means that we have received your order in our system and pre-authorised your credit card for the purchase. As soon as we receive your order, we automatically reach out to our suppliers to confirm that your item is in stock and available for immediate shipment.
If your item is on backorder (which can increase shipping times up to 4 weeks), we will reach out to you via phone or email before confirming your order.
Shipping Times:
If your order is in stock, it will ship by the following business day. Please allow 2 - 5 business days for shipping (allow 1 or 2 extra days if you're in NT, WA, or a remote location).
Once your item has been shipped you will be emailed a consignment number so you can track your order.
30 Day Guarantee:
If your order arrives and you realise that it's not the right piece of equipment for you, then you are welcome to return it within 30 days of your purchase.
Note: the product must be in new condition, in the original packaging.
To request a refund or exchange, please email support@deltapro.com.au within 30 days of placing your order. Click here for further information on Exchanges and Returns.
Delta Pro are committed to helping you find the right piece of equipment, with the right specifications.
Whether you're looking for a multimeter, clamp meter, leakage tester, insulation tester, thermal imager, or other specialty meter, we have what you need.
And in the unlikely event that we don't, we can most likely source it for you!
We've teamed up with some great delivery drivers to make sure you receive your order as quickly as possible. We know you want your order fast, and we do everything we can to make sure that happens.
Our founder Steve is an electrician himself, and he says there's nothing worse than having dodgy tools and equipment in your toolbox. (We in the office however feel confident there are in fact things much MUCH worse. Like you know, being chased by a crazy, angry bear; or being a hit by speeding bus; or being zapped by 240 volts of electricity while standing bare foot in a puddle... But you know, he's the boss, so we'll go with what he says). Which is why he has made sure that every brand and model stocked in our store is a brand with a solid reputation for quality products.
Shop risk free, and be confident in your choice! If you're not 100% sure you've ordered the best piece of equipment for your needs (although this is unlikely, particularly as you have our easy-to-use search filtering system and Steve's help if you need it!), then you're welcome to return any of our items within 30 days, for a full refund.
(See our Returns Policy for more info).
Delta Pro are authorised dealers for all our brands, which means you get the full manufacturer's warranty on all products. This is a minimum of 12 months unless stated otherwise based on the product.
That's right, Steve has been using multimeters and clamp meters since he was 15 years old. He's got personal experience using a large range of different products, and is pretty well versed on all the different features and functions and what they mean. If you're not sure exactly what you're after, or if you have questions on any of the products, feel free to get in touch. Steve is always happy to chat. Call us on 1300 678 180, email us at info@deltapro.com.au or use the live chat!
Look at what our customers are saying -
"I wanted to get a multimeter for my son, but had no idea where to start. Your home and hobbyist collection really helped." Bob W, NSW
Still not convinced? Find out more More about us and meet Steve in a slightly awkward video (hey, he's an electrician, not movie star!).
And, at the risk of repeating ourselves... did we mention expert advice and support?
If you'd like assistance finding the best multimeter or clamp meter for you, then you're in the right place! Simply click on the image below, answer a couple questions about how and where you're planning on using your new meter, and we'll do the research for you. Then you only need to keep an eye out in your emails for our suggestions.
Confused?
Overwhelmed?
It’s one thing to know what basic functions you require of a multimeter - Voltage, Current, Resistance, Capacitance, Temperature etc. It’s another thing to nut through all the specifications and understand exactly what your multimeter is capable of.
A lot of the time you only need to know the course parameters of each measurement, e.g. up to 1000A current, 600V voltage, 1 mega-ohm resistance etc. But sometimes, particularly in industrial applications, you need to know how your multimeter performs a particular test, how accurate the displayed results are, and whether or not the multimeter will be safe and reliable for the intended application.
This is where terms such as count, range, resolution, basic accuracy, IP rating, CAT rating, True RMS, crest factor and others come into play.
If you are not familiar with these terms and how they relate to multimeter measurement, Steve has put together a series of blogs to explain in laymen’s terms what each mean.