chosen by an electrician, for electricians. FREE SHIPPING ON ALL ORDERS, AUSTRALIA WIDE.

Flir IM75 Insulation Tester & DMM Combo with Meterlink® with free Voltage Detector Pen

Flir IM75 Insulation Tester & Multimeter with True RMS, Bluetooth and Meterlink®

Brand: Flir
Item Number: IM75

$962.50 On Sale

    • Why Buy From Delta Pro Meters & Measurement

    Flir IM75 insulation tester and multimeter

    The FLIR IM75 Insulation & DMM is both an advanced multifunction digital multimeter and premier handheld insulation tester for installation, troubleshooting and maintenance professionals.

    The IM75 includes several specialty insulation modes including: Polarization Index, Dielectric Absorption and Earth Bond Resistance. Insulation tests can be performed instantly, continuously and over a timed duration for in-depth assessment. 

    ** THIS PRODUCT COMES WITH A FREE GIFT - an Extech DV23 voltage detector pen, valued at $29 ** 

     

    QUICK STATS

    • True RMS 
    • Insulation Testing 50/100/250/500/1000 V. Ranges 4.000MΩ, 40.00 MΩ, 400.0MΩ, 4000 MΩ, 4.1GΩ-20.0GΩ
    • AC and DC Voltage Resolution/Range   0.1V on 1000.0V range
    • Count 4000
    • CAT IV 600V, CAT III 1000V
    • DC Voltage Basic Accuracy  ±(0.1% + 5d)
    • AC Voltage Basic Accuracy  ±(1.5% + 5d) at 50 to 60Hz. See specifications in user manual for specific acuracies.
    • Warranty Limited Lifetime Warranty.  (See details in specifications below).

     

    FEATURES 

    * This full-function, True RMS 1000V-range digital multimeter measures AC and DC voltage, capacitance, frequency (ACV), and has VFD mode, diode-test, and continuity check capabilities.

    * Rugged: 3 meter drop-tested and IP-54-rated

    * VFD Mode: engineered to deliver accurate readings and diagnostics, no matter the environmental conditions. In industrial environments where motors, pumps and other processing equipment are controlled by switching electronics and variable frequency drives (VFDs), it can be difficult to test accurately when distorted waveforms exist on electronic loads. The IM75’s VFD Mode uses a low-pass filter to ensure precision readings even when signals are noisy.

    * Data Recording and Bluetooth Connectivity: When extended testing is required for trending and analysis, up to 99 readings can be recorded in the IM75’s internal memory.  For extended data monitoring and remote viewing, the FLIR IM75 connects via Bluetooth to compatible smartphones and tablets using the FLIR Tools Mobile app.

    Now, you can monitor electrical readings on equipment in closed cabinets, with dangerous moving components, or with extreme temperatures – all from a safe distance.  Use the app to share diagnostic results with colleagues or customers on-site or remotely — share as primary readings or within professional-looking reports that are easily created.

    As part of the FLIR family, this innovative meter also communicates with METERLiNK-enabled FLIR IR cameras, helping you record electrical readings on thermal images in real time.  Whether you’re working on complex electrical, mechanical or pump systems, you want tools that can work together to gather and record all the relevant data—temperature and electrical together on one thermal image. This not only means you save time, it also ensures accurate, coordinated documentation for PdM inspection reports.

    * Super-bright LED worklights illuminate poorly-lit work areas without the use of a flashlight. These built-in flood-pattern lights free up a hand, adds confidence when performing visual inspections (for wear, pitting, dirt, corrosion and dust) and makes it easier to read faded labels and other markings, especially at unfamiliar job sites.

    * 4,000-count dual display with analog bargraph is LED-illuminated making it bright and easy to read anywhere. 

    * In addition to recording up to 99 manually entered readings, versatile data functions including auto and standard hold.  For peace of mind, FLIR backs up its durable combo insulation tester / multimeters with a limited lifetime warranty.

    * Insulation testing capabilities 

    * Digital insulation resistance tester (or megohmmeter) with 5 different test voltages (50V, 100V, 250V, 500V, 1000V) for measuring resistance (or ‘megging’) from 4MΩ to 20 GΩ with a resolution as low as 0.001MΩ and accuracy down to ±1.5%.

    * Includes several test modes not typically found in compact, handheld insulation testers including: Polarization Index, Dielectric Absorption and Earth Bond Resistance.

     

    SPECIFICATIONS

    Technical Summary Max Range Basic Accuracy
    Insulation Resistance 

    4MΩ to 40MΩ

    400MΩ to 4000MΩ

    4.1GΩ to 20 GΩ

    ±1.5%

    ±3.0%

    ±10.0%
    Insulation Test Voltages 50, 100, 250, 500 and 1000V
    DC Voltage 1000.0V ±0.1%
    AC Voltage 1000.0 V ±1.5%
    VFD AC Voltage 1000.0V ±1.5%
    Earth Bond Resistance 40Ω to 40KΩ ±1.5%
    Capacitance 10 mF ±1.2%
    Frequency (ACV) 40kHz +/- 5 digits
    Diode Test 2V ±1.5%
    Continuity 400.0Ω ±0.5%
    General Information
    IP Rating, Drop Test IP 54, 2m
    Category Rating CAT III-1000V, CAT IV-600V
    Bluetooth Range 10m
    Battery Type 6 x AAA
    Memory 99 internal storage locations
    Operating Temperature 0 to 50°C
    Warranty Limited Lifetime* Coverage is defined by the greater of whichever condition below applies:
    • Seven (7) years after product is no longer made by FLIR
    • Ten (10) years from date of purchase

      

    DATA SHEET   Click here to view in pdf format

     

    USER MANUAL

    We know you want your order FAST, and so we make sure you receive it as quickly as possible.

    If your order is in stock, it will ship by the following business day.  Shipping is generally 2 - 5 business days (allow 1 or 2 extra days if you're in NT, WA, or a remote location).

    And of course we want the ordering process to be as simple as possible for you, so rather than offering tiered shipping rates, we offer FREE SHIPPING AUSTRALIA WIDE on all orders.

    If you have any questions about the shipment of your order, feel free to contact us at support@deltapro.com.au

    ******

    Order Confirmation:  

    As soon as you place your order, you will receive an order confirmation email.  This means that we have received your order in our system and pre-authorised your credit card for the purchase.  As soon as we receive your order, we automatically reach out to our suppliers to confirm that your item is in stock and available for immediate shipment.  

    If your item is on backorder (which can increase shipping times up to 4 weeks), we will reach out to you via phone or email before confirming your order. 

     

    Shipping Times:  

    If your order is in stock, it will ship by the following business day.  Please allow 2 - 5 business days for shipping (allow 1 or 2 extra days if you're in NT, WA, or a remote location).

    Once your item has been shipped you will be emailed a consignment number so you can track your order.

     

    30 Day Guarantee:  

    If your order arrives and you realise that it's not the right piece of equipment for you, then you are welcome to return it within 30 days of your purchase. 

    Note: the product must be in new condition, in the original packaging.

    To request a refund or exchange, please email support@deltapro.com.au within 30 days of placing your order.  Click here for further information on Exchanges and Returns.

    Delta Pro are committed to helping you find the right piece of equipment, with the right specifications. 
     Whether you're looking for a multimeter, clamp meter, leakage tester, insulation tester, thermal imager, or other specialty meter, we have what you need.  
    And in the unlikely event that we don't, we can most likely source it for you!

     

    Easy-to-use website

    You'll see that our site offers a super easy to use search-filtering-system on each of our collection pages.
    Make sure to put it to good use, as it will make your searching so much easier!
    And as you begin searching, you'll see that we offer a wide range of quality test and measurement equipment (multimeters, clamp meters, leakage testers, thermal imagers, insulation testers, plus specialty meters).
    We wanted to make sure that there was a good selection of quality meters for you to choose from, and options that would suit various specialties and requirements.  

    We’ve also included ‘Quick Stats’ in each of the meter descriptions for you…  making sure that it's super clear, fast and easy to find those meter features and specs you're looking for.  Saving you hours and hours of research and scouring through fine print! 

    If you're new to test and measuring equipment, you will also find it helpful to read some of the blogs, or the Understanding Terms and Features articles.  So many features can be listed on a multimeter or clamp meter, and if you don't fully understand those features yet, you'll find the articles helpful!
     
     

    Personal Service

    We are a family-run business, 100% Australian owned and operated. 
    We're a small business, and committed to impressing you with our outstanding professional and personalised service.

     

     

    Fast & Free Shipping, Australia Wide

    Delivery van

    We've teamed up with some great delivery drivers to make sure you receive your order as quickly as possible.   We know you want your order fast, and we do everything we can to make sure that happens.

     

    Reputable & Quality Brands

    Sticker showing Quality Brand Stamp

    Our founder Steve is an electrician himself, and he says there's nothing worse than having dodgy tools and equipment in your toolbox.  (We in the office however feel confident there are in fact things much MUCH worse.  Like you know, being chased by a crazy, angry bear; or being a hit by speeding bus; or being zapped by 240 volts of electricity while standing bare foot in a puddle...  But you know, he's the boss, so we'll go with what he says).    Which is why he has made sure that every brand and model stocked in our store is a brand with a solid reputation for quality products. 

     

    30 Day Returns

    30 Day Guarantee

    Shop risk free, and be confident in your choice!  If you're not 100% sure you've ordered the best piece of equipment for your needs (although this is unlikely, particularly as you have our easy-to-use search filtering system and Steve's help if you need it!), then you're welcome to  return any of our items within 30 days, for a full refund.

    (See our Returns Policy for more info).

     

    Minimum 12-Month Manufacturer's Warranty

    Delta Pro are authorised dealers for all our brands, which means you get the full manufacturer's warranty on all products. This is a minimum of 12 months unless stated otherwise based on the product.

     

    Expert Advice & Support

    Sign - Chosen by an Electrician, for Electricians

    That's right, Steve has been using multimeters and clamp meters since he was 15 years old.  He's got personal experience using a large range of different products, and is pretty well versed on all the different features and functions and what they mean.  If you're not sure exactly what you're after, or if you have questions on any of the products, feel free to get in touch.  Steve is always happy to chat.  Call us on 1300 678 180, email us at info@deltapro.com.au or use the live chat!

     

    Don't just take our word for it though...

    Look at what our customers are saying - 

    "Excellent service, thanks very much Steve, really appreciate your help and advice!"  Matt Bowden, Starboard Air, QLD
    ***
    "Fantastic, quick delivery and very helpful sales staff. Will definitely be purchasing from them again."  Daniel G, Electrician, NSW
    ***

    "I wanted to get a multimeter for my son, but had no idea where to start.  Your home and hobbyist collection really helped."  Bob W, NSW

     

    Still not convinced?  Find out more More about us and meet Steve in a slightly awkward video (hey, he's an electrician, not movie star!).

     

    Expert Advice & Support

    And, at the risk of repeating ourselves...  did we mention expert advice and support? 

    If you'd like assistance finding the best multimeter or clamp meter for you, then you're in the right place!  Simply click on the image below, answer a couple questions about how and where you're planning on using your new meter, and we'll do the research for you.  Then you only need to keep an eye out  in your emails for our suggestions.

     

    Man overwhelmed by choice of multimeters

     

    Confused?

    Overwhelmed?

    It’s one thing to know what basic functions you require of a multimeter - Voltage, Current, Resistance, Capacitance, Temperature etc.  It’s another thing to nut through all the specifications and understand exactly what your multimeter is capable of.

    A lot of the time you only need to know the course parameters of each measurement,  e.g. up to 1000A current,  600V voltage,  1 mega-ohm resistance etc.  But sometimes, particularly in industrial applications, you need to know how your multimeter performs a particular test, how accurate the displayed results are, and whether or not the multimeter will be safe and reliable for the intended application. 

    This is where terms such as count, range, resolution, basic accuracy, IP rating, CAT rating, True RMS, crest factor and others come into play. 

    If you are not familiar with these terms and how they relate to multimeter measurement, Steve has put together a series of blogs to explain in laymen’s terms what each mean.

     Check them out here.

    Flir IM75 insulation tester and multimeter

    The FLIR IM75 Insulation & DMM is both an advanced multifunction digital multimeter and premier handheld insulation tester for installation, troubleshooting and maintenance professionals.

    The IM75 includes several specialty insulation modes including: Polarization Index, Dielectric Absorption and Earth Bond Resistance. Insulation tests can be performed instantly, continuously and over a timed duration for in-depth assessment. 

    ** THIS PRODUCT COMES WITH A FREE GIFT - an Extech DV23 voltage detector pen, valued at $29 ** 

     

    QUICK STATS

    • True RMS 
    • Insulation Testing 50/100/250/500/1000 V. Ranges 4.000MΩ, 40.00 MΩ, 400.0MΩ, 4000 MΩ, 4.1GΩ-20.0GΩ
    • AC and DC Voltage Resolution/Range   0.1V on 1000.0V range
    • Count 4000
    • CAT IV 600V, CAT III 1000V
    • DC Voltage Basic Accuracy  ±(0.1% + 5d)
    • AC Voltage Basic Accuracy  ±(1.5% + 5d) at 50 to 60Hz. See specifications in user manual for specific acuracies.
    • Warranty Limited Lifetime Warranty.  (See details in specifications below).

     

    FEATURES 

    * This full-function, True RMS 1000V-range digital multimeter measures AC and DC voltage, capacitance, frequency (ACV), and has VFD mode, diode-test, and continuity check capabilities.

    * Rugged: 3 meter drop-tested and IP-54-rated

    * VFD Mode: engineered to deliver accurate readings and diagnostics, no matter the environmental conditions. In industrial environments where motors, pumps and other processing equipment are controlled by switching electronics and variable frequency drives (VFDs), it can be difficult to test accurately when distorted waveforms exist on electronic loads. The IM75’s VFD Mode uses a low-pass filter to ensure precision readings even when signals are noisy.

    * Data Recording and Bluetooth Connectivity: When extended testing is required for trending and analysis, up to 99 readings can be recorded in the IM75’s internal memory.  For extended data monitoring and remote viewing, the FLIR IM75 connects via Bluetooth to compatible smartphones and tablets using the FLIR Tools Mobile app.

    Now, you can monitor electrical readings on equipment in closed cabinets, with dangerous moving components, or with extreme temperatures – all from a safe distance.  Use the app to share diagnostic results with colleagues or customers on-site or remotely — share as primary readings or within professional-looking reports that are easily created.

    As part of the FLIR family, this innovative meter also communicates with METERLiNK-enabled FLIR IR cameras, helping you record electrical readings on thermal images in real time.  Whether you’re working on complex electrical, mechanical or pump systems, you want tools that can work together to gather and record all the relevant data—temperature and electrical together on one thermal image. This not only means you save time, it also ensures accurate, coordinated documentation for PdM inspection reports.

    * Super-bright LED worklights illuminate poorly-lit work areas without the use of a flashlight. These built-in flood-pattern lights free up a hand, adds confidence when performing visual inspections (for wear, pitting, dirt, corrosion and dust) and makes it easier to read faded labels and other markings, especially at unfamiliar job sites.

    * 4,000-count dual display with analog bargraph is LED-illuminated making it bright and easy to read anywhere. 

    * In addition to recording up to 99 manually entered readings, versatile data functions including auto and standard hold.  For peace of mind, FLIR backs up its durable combo insulation tester / multimeters with a limited lifetime warranty.

    * Insulation testing capabilities 

    * Digital insulation resistance tester (or megohmmeter) with 5 different test voltages (50V, 100V, 250V, 500V, 1000V) for measuring resistance (or ‘megging’) from 4MΩ to 20 GΩ with a resolution as low as 0.001MΩ and accuracy down to ±1.5%.

    * Includes several test modes not typically found in compact, handheld insulation testers including: Polarization Index, Dielectric Absorption and Earth Bond Resistance.

     

    SPECIFICATIONS

    Technical Summary Max Range Basic Accuracy
    Insulation Resistance 

    4MΩ to 40MΩ

    400MΩ to 4000MΩ

    4.1GΩ to 20 GΩ

    ±1.5%

    ±3.0%

    ±10.0%
    Insulation Test Voltages 50, 100, 250, 500 and 1000V
    DC Voltage 1000.0V ±0.1%
    AC Voltage 1000.0 V ±1.5%
    VFD AC Voltage 1000.0V ±1.5%
    Earth Bond Resistance 40Ω to 40KΩ ±1.5%
    Capacitance 10 mF ±1.2%
    Frequency (ACV) 40kHz +/- 5 digits
    Diode Test 2V ±1.5%
    Continuity 400.0Ω ±0.5%
    General Information
    IP Rating, Drop Test IP 54, 2m
    Category Rating CAT III-1000V, CAT IV-600V
    Bluetooth Range 10m
    Battery Type 6 x AAA
    Memory 99 internal storage locations
    Operating Temperature 0 to 50°C
    Warranty Limited Lifetime* Coverage is defined by the greater of whichever condition below applies:
    • Seven (7) years after product is no longer made by FLIR
    • Ten (10) years from date of purchase

      

    DATA SHEET   Click here to view in pdf format

     

    USER MANUAL

    We know you want your order FAST, and so we make sure you receive it as quickly as possible.

    If your order is in stock, it will ship by the following business day.  Shipping is generally 2 - 5 business days (allow 1 or 2 extra days if you're in NT, WA, or a remote location).

    And of course we want the ordering process to be as simple as possible for you, so rather than offering tiered shipping rates, we offer FREE SHIPPING AUSTRALIA WIDE on all orders.

    If you have any questions about the shipment of your order, feel free to contact us at support@deltapro.com.au

    ******

    Order Confirmation:  

    As soon as you place your order, you will receive an order confirmation email.  This means that we have received your order in our system and pre-authorised your credit card for the purchase.  As soon as we receive your order, we automatically reach out to our suppliers to confirm that your item is in stock and available for immediate shipment.  

    If your item is on backorder (which can increase shipping times up to 4 weeks), we will reach out to you via phone or email before confirming your order. 

     

    Shipping Times:  

    If your order is in stock, it will ship by the following business day.  Please allow 2 - 5 business days for shipping (allow 1 or 2 extra days if you're in NT, WA, or a remote location).

    Once your item has been shipped you will be emailed a consignment number so you can track your order.

     

    30 Day Guarantee:  

    If your order arrives and you realise that it's not the right piece of equipment for you, then you are welcome to return it within 30 days of your purchase. 

    Note: the product must be in new condition, in the original packaging.

    To request a refund or exchange, please email support@deltapro.com.au within 30 days of placing your order.  Click here for further information on Exchanges and Returns.

    Delta Pro are committed to helping you find the right piece of equipment, with the right specifications. 
     Whether you're looking for a multimeter, clamp meter, leakage tester, insulation tester, thermal imager, or other specialty meter, we have what you need.  
    And in the unlikely event that we don't, we can most likely source it for you!

     

    Easy-to-use website

    You'll see that our site offers a super easy to use search-filtering-system on each of our collection pages.
    Make sure to put it to good use, as it will make your searching so much easier!
    And as you begin searching, you'll see that we offer a wide range of quality test and measurement equipment (multimeters, clamp meters, leakage testers, thermal imagers, insulation testers, plus specialty meters).
    We wanted to make sure that there was a good selection of quality meters for you to choose from, and options that would suit various specialties and requirements.  

    We’ve also included ‘Quick Stats’ in each of the meter descriptions for you…  making sure that it's super clear, fast and easy to find those meter features and specs you're looking for.  Saving you hours and hours of research and scouring through fine print! 

    If you're new to test and measuring equipment, you will also find it helpful to read some of the blogs, or the Understanding Terms and Features articles.  So many features can be listed on a multimeter or clamp meter, and if you don't fully understand those features yet, you'll find the articles helpful!
     
     

    Personal Service

    We are a family-run business, 100% Australian owned and operated. 
    We're a small business, and committed to impressing you with our outstanding professional and personalised service.

     

     

    Fast & Free Shipping, Australia Wide

    Delivery van

    We've teamed up with some great delivery drivers to make sure you receive your order as quickly as possible.   We know you want your order fast, and we do everything we can to make sure that happens.

     

    Reputable & Quality Brands

    Sticker showing Quality Brand Stamp

    Our founder Steve is an electrician himself, and he says there's nothing worse than having dodgy tools and equipment in your toolbox.  (We in the office however feel confident there are in fact things much MUCH worse.  Like you know, being chased by a crazy, angry bear; or being a hit by speeding bus; or being zapped by 240 volts of electricity while standing bare foot in a puddle...  But you know, he's the boss, so we'll go with what he says).    Which is why he has made sure that every brand and model stocked in our store is a brand with a solid reputation for quality products. 

     

    30 Day Returns

    30 Day Guarantee

    Shop risk free, and be confident in your choice!  If you're not 100% sure you've ordered the best piece of equipment for your needs (although this is unlikely, particularly as you have our easy-to-use search filtering system and Steve's help if you need it!), then you're welcome to  return any of our items within 30 days, for a full refund.

    (See our Returns Policy for more info).

     

    Minimum 12-Month Manufacturer's Warranty

    Delta Pro are authorised dealers for all our brands, which means you get the full manufacturer's warranty on all products. This is a minimum of 12 months unless stated otherwise based on the product.

     

    Expert Advice & Support

    Sign - Chosen by an Electrician, for Electricians

    That's right, Steve has been using multimeters and clamp meters since he was 15 years old.  He's got personal experience using a large range of different products, and is pretty well versed on all the different features and functions and what they mean.  If you're not sure exactly what you're after, or if you have questions on any of the products, feel free to get in touch.  Steve is always happy to chat.  Call us on 1300 678 180, email us at info@deltapro.com.au or use the live chat!

     

    Don't just take our word for it though...

    Look at what our customers are saying - 

    "Excellent service, thanks very much Steve, really appreciate your help and advice!"  Matt Bowden, Starboard Air, QLD
    ***
    "Fantastic, quick delivery and very helpful sales staff. Will definitely be purchasing from them again."  Daniel G, Electrician, NSW
    ***

    "I wanted to get a multimeter for my son, but had no idea where to start.  Your home and hobbyist collection really helped."  Bob W, NSW

     

    Still not convinced?  Find out more More about us and meet Steve in a slightly awkward video (hey, he's an electrician, not movie star!).

     

    Expert Advice & Support

    And, at the risk of repeating ourselves...  did we mention expert advice and support? 

    If you'd like assistance finding the best multimeter or clamp meter for you, then you're in the right place!  Simply click on the image below, answer a couple questions about how and where you're planning on using your new meter, and we'll do the research for you.  Then you only need to keep an eye out  in your emails for our suggestions.

     

    Man overwhelmed by choice of multimeters

     

    Confused?

    Overwhelmed?

    It’s one thing to know what basic functions you require of a multimeter - Voltage, Current, Resistance, Capacitance, Temperature etc.  It’s another thing to nut through all the specifications and understand exactly what your multimeter is capable of.

    A lot of the time you only need to know the course parameters of each measurement,  e.g. up to 1000A current,  600V voltage,  1 mega-ohm resistance etc.  But sometimes, particularly in industrial applications, you need to know how your multimeter performs a particular test, how accurate the displayed results are, and whether or not the multimeter will be safe and reliable for the intended application. 

    This is where terms such as count, range, resolution, basic accuracy, IP rating, CAT rating, True RMS, crest factor and others come into play. 

    If you are not familiar with these terms and how they relate to multimeter measurement, Steve has put together a series of blogs to explain in laymen’s terms what each mean.

     Check them out here.

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    D
    D.G.
    Yes

    Fantastic, quick delivery and very helpful sales staff. Will definitely be purchasing from them again.